2012年8月20日星期一

The summer rainy season how traffic analysis vehicle immersion claims

21, China and more wide range rainstorm, of which Beijing is endured 61 years of the strongest rainfall, and the vehicles are subject to varying degrees of damage and loss of life. And the road traffic is serious suffocate suffocate and interrupt. City Road into the river, road and water seriously. Many vehicle owners to wading serious " exceed the standard ", found the plates washed lost or vehicle vesicles in a world of waters, in the face of such casualties and loss of vehicle we should how to reduce and avoid at any time, and how the vehicle after flooding should take what the correct approach to the situation we face? How to handle, we understand the specific what.
The automobile wading before driving, must carefully check the water depth, flow velocity and water into the waters, and the width and the road conditions, so as to judge whether to safely pass through. If the water depth over the wheel or the maximum fording depth, not adventure Wade, in fact, as long as the water level reached the front bumper or tire 2/3, and wading driving can be dangerous. In recognition of his car structure can pass, generally should choose the shortest distance, the most shallow, slow-moving water and underwater most solid section. If you must through deep water, please prepare the following preparations.
Face drop from the clouds come unexpectedly, heavy rain, and the city road low-lying and various other we can be expected or unexpected situation, how can we safely respond?
. with waterproof cloth or plastic bags will be electric, high tension line, ignition coil pack, and managed to increase battery location ( such as the cockpit or the compartments ).
2 to the fuel tank filler, dipstick hole and the engine, drive axle on the other vent should use waterproof fabric bandage plugging.
3 if the water level is close to the maximum fording depth, should be in the front bumper on the binding is wide board, and then use a low gear driving, the car in front of the water is pushed in wood, engine parts to form a shallow water area, so as to prevent the ignition system is water wet and loss of function.
4 when possible, as far as possible to increase the weight of the car, the car to reduce the water buoyancy and increased wheel adhesion.

没有评论:

发表评论