2013年5月19日星期日

How does an OBD2 Connector work

On board diagnostics (OBD) has come a long way since its beginning in the 1980s. OBD gives easy access to Volvo dice vida 2011A the vehicle owner to information on the state of health of the vehicle. It also makes the job of the mechanic easy to locate the problems, if any. In the earlier versions, only the malfunctioning of a particular section could be reported by an appropriate indicator light. But the latest edition, OBD2 connector has the ability to pinpoint the problem. That makes the job for the mechanic much easier and the cost of maintenance lower for the owner.

An OBD2 cable along with Volvo Vida Dice Diagnostic Tool necessary interface and software is used for detailed diagnostics of the engine. The male plug is connected to the computer of the car and the female plug is for connecting with the car components on which the check has to be made. Information collected by the OBD2 sensors is read by the computer through the OBD2 connector.
For the most advanced onboard diagnostics, the OBD2, a female 16 pin OBD2 connector is required for standardized interface with hardware. The OBD2 connector must obd2 comply with SAE J1962 standards. J1962 standards clearly specify the function of each pin. Some pins are left with no specific functions. They are meant to be used at the discretion of the vehicle manufacturer. The OBD2 connector must be located within 2 feet of the steering wheel for easy access to the driver. For earlier versions, it was located under the hood.

没有评论:

发表评论